Проблема с изделием? Скачать инструкцию BAMIX DE LUXE

Введите модель изделия BAMIX...

ПОИСК

To reactivate microphone: Press the mute key again or press any other key. Setting the ringer You can set the ringer melody and volume or turn it off. c K Lift the handset, press the set key. # Press the hash key. O Press one of the number keys, see Table. (0: Ringer off until handset is next lifted). K Press the set key. Volume Melody 1 Melody 2 Melody 3 * and # are saved regardless of the set dialling mode but are only dialled with tone dialling mode ( page 4). If the number entered is longer than 21 digits, the saved number is deleted. Notes on saving and deleting programmable direct dial and speed dial numbers £ Dialling pauses One or more dialling pauses can be entered using I (not at 1st digit). Pauses are transferred to the memory and are necessary for certain extension systems (e. : 0 I 2368). u Dialling a dialling pause within the first 5 digits: The entire number saved is dialled, including the 2-second dialling pause. u Dialling a dialling pause after the first 5 digits: The portion of the number saved after the pause is only dialled after pressing the I key. 2 4 5 M N low medium 3 L O high Operation on a PABX Special functions/Recall key During an external call, you can make an enquiry or forward the call. To do this, press the recall key H. The subsequent procedure depends on your PABX. To set the recall key, the telephone’s flash time must be set consistent with your PABX. Please refer to the operating instructions for your PABX. Adjusting the telephone Setting the handset volume The handset volume can be set to two levels. F Press the handset volume control key. The primary volume is reset after hanging up. Changing the dialling mode/ flash time The telephone supports the following dialling modes: T2: Tone dialling, flash time 280/ 600 ms (depending on device model) Mute You can deactivate the telephone's microphone during a call...