3 UL 1950, EN 60950, CSA 22. 2 #950 EN 55022 Class B, EN 50082-1, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class 2, AS/NZS 3548 Class B Category 5 screened cables must be used to ensure compliance with the requirements of these standards. EN 60068 (IEC 68) Electrical Power Inlet AC Line Frequency Power Consumption Power Dissipation Input Voltage Current Rating IEC 320 50/60 Hz 48 VA 164 BTU/hr 100­240 VAC 1. 0 Amps (maximum) Environmental Operating Temperature Humidity 0 to 50 °C (32 to 122°F) 0 to 90% (non-condensing) Environmental Physical Width Depth Height Weight Mounting 440mm (17. ) 224mm (8. ) 44mm (1. ) or 1U 2. 04kg (4. 5lb) free standing, or 19in. rack or wall mounted using the mounting kit supplied Switching Functionality The switching core and physical layer interfaces in the Baseline Switch conform to the following requirements: 3 10BASE-T standard 3 100BASE-TX standard 3 (Nway) auto-negotiation standard 3 IEEE 802. 1d (but without Spanning Tree Algorithm support) The switch database in the Baseline Switch supports a minimum of 750 MAC addresses. DUA1646-0AAA02 1 SAFETY INFORMATION Please read the following safety information carefully before installing the Baseline Switch. WARNING: Installation and removal of the unit must be carried out by qualified personnel only. France and Peru Only This unit cannot be powered from IT supplies. If your supplies are of IT type, this unit should be powered by 230V (2P+T) via an isolation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to Earth (Ground). Impédance à la terre Power Cord Set This must be approved for the country where it will be used...