This device bundles precise time keeping, weather forecast, and indoor and outdoor temperature monitoring features into a single tool you can use from the convenience of your home. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. Weather display 2. Outdoor temperature 3. Channel icon with sensor signal 4. Low battery icon for sensor 5. Atomic clock reception icon 6. Alarm setting 7. Alarm activated 8. Calendar 9. Indoor icon 10. Indoor temperature 11. Low battery icon for main unit 12. Time 13. Day of the week / seconds / time zone 14. Moon phase REMOTE SENSOR (THN122N) This product is shipped with a THN122N Thermometer Sensor that collects Temperature data. Data can be collected from up to 3 sensors. Additional sensors sold separately. NOTE Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure. This is normal and does not affect general product performance. The reception will resume once the interference ends. SET UP SENSOR 1. Open the remote sensor battery compartment with a small Phillips screwdriver. Insert the batteries, matching the polarity (+ and -) as shown in the battery compartment. CLOCK The clock automatically synchronizes the current time and date when it is brought within range of the WWVB-60 atomic clock signal generated from Fort Collins, Colorado. For more information, please visit: www. boulder. gov/timefreq/ stations/>radioclocks. htm NOTE The signals are collected by the main unit when it is within 932 miles (1500 km) of a signal...