It is ideal for users who want the high-speed performance of 10/100 switching but do not need sophisticated management capabilities. The Baseline 10/100 Switch is shipped ready for use. No configuration is necessary. The Baseline 10/100 Switch has 12 or 24 shielded RJ-45, 10/100Mbps auto-negotiating ports on the front panel. Each port automatically determines the speed and duplex mode of the connected equipment and provides a suitable switched connection. The Baseline 10/100 Switch is suited for office use where it can be free standing, or rack mounted (in a wiring closet or equipment room). The Baseline 10/100 Switch comes with: T T T One power cord for use with the Baseline 10/100 Switch Four self-adhesive rubber pads One mounting kit The Switch can be powered either from the AC mains supply, or through an optional 3Com SuperStack 3 Advanced Redundant Power System (3C16071B). Contact your supplier for details. The Baseline 10/100 Switch provides high performance switched connections to 10Mbps and 100Mbps hubs, servers and workstations that require a dedicated switched link. 1 HOW TO USE THE BASELINE 10/100 SWITCH Numbered elements in this diagram refer to numbered sections in the text. A 24-port unit is shown. device. Each port can be connected to either a 10BASE-T or a 100BASE-TX device. If you connect two Baseline 10/100 Switch units together, Front Panel 1 24 RJ-45 10/100 Ports and 1 RJ-45 1000 Port WARNING: RJ-45 ports. These are shielded RJ-45 data sockets. They cannot be used as telephone sockets. Only connect RJ-45 data connectors to these sockets. Either shielded or unshielded data cables with shielded or unshielded jacks can be connected to these data sockets. AVERTISSEMENT: Les ports RJ-45...