Read the instructions in this leaflet carefully and keep them safe. For your safety, this product conforms to all applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Food Compliant Materials, Environment,. Moulinex has an ongoing policy of research and development and may modify these products without prior notice. Choice of plates According to the model, you may use different sets of plates. A · To remove the plates: Hold the plates by the handles on each side and press the release button. B C · To replace the plates: Place the plate at an angle with the slots below the stops. Press down on the plate to lock it down. When using for the first time, wipe the plates using kitchen paper towel moistened with cooking oil. Remove the surplus cooking oil using clean kitchen paper towel. Make sure that the appliance is not hot and unplugged before changing the plates. Connection, switching on and pre-heating Close the appliance. Fully unroll the electrical cord. Check that the electrical installation is GB compatible with the wattage and voltage stated on the bottom of the appliance. Only plug the appliance into an earthed socket. If an extension cord is used: - it must be with an incorporated earth connection; - take every precaution to ensure that people cannot become caught up in it. If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Plug the electrical cord into the wall socket: the light comes on. When using for the first time, a slight odour or small amount of smoke may be given off; this is normal. Leave the appliance to pre-heat: the light goes out when the correct cooking temperature is reached. Prevention of accidents at home For a child, even a slight burn may sometimes be serious...