Removing the packaging and check After unpacking, make sure that the dryer is undamaged. If in doubt, do not use the dryer. Contact After-Sales Service or your local retailer. Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. Remove the protective foil from the control panel. Electrical Connections Electrical connections must be carried out by a qualified technician in compliance with the manufacturer's instructions and current standard safety regulations. Electrical connection must comply with local Electricity Board regulations. Voltage information, power consumption and the required fuse protection is shown on the rating plate mounted at the rear of the dryer. The manufacturer cannot accept any liability for personal injury or damage to property resulting from failure to adhere to these instructions. The dryer must be earthed as prescribed by law. Do not use extension leads or multiple adaptors. Before any maintenance on the dryer disconnect it from the mains supply. Do not operate the dryer if it has been damaged during transport. Contact one of our After-Sales Service technicians. Mains cable replacement is only to be carried out by After-Sales Service...