Скачать инструкцию



Фрагмент инструкции: руководство пользователя APPLE UNCOMPRESSED SD EDITING

Подробные указания по применению содержатся в руководстве пользователя.

Editing in high data rate formats such as uncompressed SD can stress all aspects of a computer system. This means it is important to make sure that each system component is adequate in order to achieve maximum overall system performance. These components include the computer, RAM, and disk storage subsystem. For this reason, the following hardware is suggested in order to achieve the maximum performance for uncompressed SD editing. Hardware · 1 x Dual 2. 0 GHz or faster Power Mac G5 with at least 1 GB of memory. The system should be configured with either the ATI Radeon 9800 or NVIDIA GeForce FX 5200 Ultra or later graphics card. · 1 x 2. 52 TB Xserve RAID. The Xserve RAID should be built using the CTO option with upgraded RAM on the controllers to at least 512 MB. · 1 x Apple Fibre Channel PCI Card · 1 x Apple ProIO FireWire capture/playback device or equivalent PCI capture/ playback card (such as AJA Io, Kona SD, or Pinnacle CineWave) Software Mac OS X version 10. 3 Panther or later Final Cut Pro 4. 1 or later Apple ProIO drivers v1. 2 or later QuickTime 6. 4 · · · · 1 Hardware Setup Once you have properly installed all the pieces listed earlier, follow the steps below to configure the Xserve RAID hardware component. Setting up your Xserve RAID Once your Xserve RAID has finished its initial drive indexing after being powered on for the first time, and all lights are green, do the following: 1 Connect an Ethernet cable to the RAID controller (either one or both). 2 Connect each of the Fibre Channel connectors on the controllers of the Xserve RAID to the connectors on the PCI Fibre Channel card installed in the G5 computer. Important: Make sure both Fibre Channel cables are properly connected and both channels are in use...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.