0010532244 LOW COOL OFF FAN LOW HEAT MED COOL HIGH COOL HIGH HEAT MED COOL LOW COOL HIGH COOL OFF FAN LOW HEAT HIGH HEAT Mode switch controls the fan motor speed,Cooling speed or Heating speed. When set to "FAN", fan motor runs to blow out air. When set to "HIGH COOL", air-con will start cooling at high speed, blowing out strong air. When set to "MED COOL", air-con will start cooling at med speed, blowing out less stronger air. When set to "LOW COOL", air-con will start cooling at low speed, blowing out gentle air. When set to "HIGH HEAT", air-con will start heating at high speed, blowing out strong air. When set to "LOW HEAT", air-con will start heating at low speed, blowing out gentle air. When set to "OFF", air conditioner stops running. This function will work only under cooling status. 4 AIR CONDITIONER INSTALLATION (ONLY FOR REFERANCE) SELECTION OF THE INSTALLATION POSITION 1,The air-conditioner is better installed in shadow or in a place with short period of sunshine. In case the air-conditioner is installed at the point exposed directly to the sunshine, it should be protected from the direct sunlight as possible in order to avoid the long time of direct sunlight otherwise its performance will be lowered. (As illustrated in Fig. For the convenience of operation, it is recommended that air-conditioner be installed at least at the height of 760-1300 mm above the floor and no obstacles before it for a free airflow. The shutters at both sides and the top of air-conditioner should be protruded outdoors free from being blocked by wall, window,ect. The back of air-conditioner should be kept over 500mm from the obstacles (for example, wall, etc. ) (As illustrated in Fig. To have an efficient drainage, the back part of the air-conditioner should be inclined downward by 5-10mm (As illustrated in Fig...