oregonscientific. com Congratulations on purchasing the RM826 Radio Controlled Travel Clock. The R826 is a clock that automatically sets the time and date from signals broadcast by the US Atomic Clock, one of the world's most accurate timekeepers. This extraordinary timepiece, located outside Boulder, Colorado, is operated by the U. Department of Commerce's National Institute of Standards and Technology. Your RM826 Clock automatically activates its receiver immediately upon battery insertion and then six times every 24 hours and make any necessary adjustments in its time display. The clock not only sets itself to synchronize its digital time and date with the atomic clock's signals, but it also automatically adjusts for daylightsavings time ! DATE/ALARM (Figure A. 6) Press the DATE/ALARM key once to show the alarm time. The ((·)) icon is displayed in the lower left portion of the screen to alert you that the display is showing the alarm time. To return to the month and date display, press the DATE/ALARM key once. To set the alarms please refer to the section on setting the Alarm. NOTE: The Radio Controlled Travel Clock will continue to display the selected function (Alarm Time or Date) until the DATE/ALARM button is pressed again. - Strong Setting the Year Month and Date 1) Press and hold MODE button for at least three seconds. The "Hour" segment of the clock time will begin flashing. 2) Briefly press the MODE button and the "Minutes" segment will begin flashing. 3) Briefly press the MODE button once more. The clock time will disappear and be replaced by a flashing year (Ex. 1995). This is the year set mode. 4) While the "Year" segment is flashing press the [ ] button to set the desired year. 5) When the desired year is reached briefly press the MODE button and the "Month" digit will start flashing. 6) Press [ ] button until the desired month appears on the display...