Скачать инструкцию



Фрагмент инструкции: руководство пользователя WHIRLPOOL ACM-930-1-IX

Подробные указания по применению содержатся в руководстве пользователя.

4 INSTALLATION INSTRUCTIONS ELECTRICAL CONNECTION This appliance must be earthed by law. Before connecting the appliance to the electrical supply, check that the earth system in your house is working correctly. Check that unit voltage and power, marked on the rating plate applied on the appliance, are correct for the supply. It is necessary that the feeding network is protected by a powerful switch able to disconnect completely the network with a contacts separation of at least 3 mm. Be sure that the earth wire green/yellow is not interrupted by the switch. WARNING: THIS APPLIANCE MUST BE EARTHED Connecting the mains cable Open the mains terminal block cover as shown, unscrew the cable clamp “A” and unscrew (not fully) the screws in the mains terminal block which secure the three wires of the mains cable. Fit the cable and refit the cable clamp “A” (fig. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: GREEN & YELLOW. EARTH BLUE. NEUTRAL BROWN. LIVE The supply cable must not come into contact with any component the temperature of which exceeds the ambient temperature by 50°C. Easy access to the plug or the switch is ensured once the appliance is installed. Ensured that there is sufficient cable allowed for any subsequent removal of the unit. In order to avoid hazard, any electrical work performed on this equipment or its associated wiring should only be done by persons authorised by the manifacture or similary qualified persons...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.