Скачать инструкцию



Фрагмент инструкции: руководство пользователя WHIRLPOOL ARG-970-R

Подробные указания по применению содержатся в руководстве пользователя.

If the mains lead of this appliance is fitted with a BS 1363A 13 amp fused plug, to change a fuse in this type of plug use an A. approved fuse to BS 1362 type and proceed as follows: A suitable altenative plug should then be fitted to the cable. The wires in this mains lead are coloured in accordance with the following code; BLUE - “NEUTRAL” (“N”) BROWN - “LIVE” (“L”) GREEN AND YELLOW - “EARTH” (“E”) 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter “E” or by the Earth symbol 4 or coloured green or green and yellow. The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured black. The BROWN wire must be connected to the terminal which is marked with the letter “L” or coloured red. GREEN AND YELLOW (“E”) BROWN (“L”) 1. Remove the fuse cover (A) and fuse (B). Fit replacement 13A fuse into fuse cover. Refit both into plug. Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted. Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store. BLUE (“N”) Connection to a typical 13 amp plug CABLE CLAMP. Connection to a rewireable plug If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of in order to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. For the Republic of Ireland only The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.