When you are attaching the mount kit to your motorcycle, follow these guidelines: · If you are unsure about attaching the mount kit yourself, ask a professional to fit it for you. · Make sure that the mount kit does not interfere with any of the controls on the motorcycle. · Always use the correct tools. If you use unsuitable tools, you may damage or break the mount kit. · Do not overtighten nuts. You may crack parts of the mount kit or damage your handlebars if you overtighten the nuts. · If you are using the u-bolt, don't forget to put the rubber caps provided over the exposed threads. Damage due to modifications, improper installation, road hazards or accident, are not covered. Neither RAM nor TomTom shall be liable for any injury, loss, or damage, direct or consequential, arising out of improper installation, or inability to use product. Before use, the user shall determine the suitability of the product for its intended use. The user assumes all risk and liability, whatsoever, in connection with the mount. Secure your TomTom RIDER Set a password for your TomTom RIDER so that only you can use it. Every time you start your RIDER you will have to enter your password. To set the password, you have to run your RIDER using TomTom HOME. You can then use TomTom HOME to set the password. To set a password on your device, do the following: 1. Connect your RIDER to your computer and switch it on. Start TomTom HOME if it does not start automatically. If you do not have TomTom HOME installed, insert the CD that came with your RIDER to install it. 6 Alternatively, you can download TomTom HOME from www. tomtom. Make sure you always have the latest version of TomTom HOME. For more information about TomTom HOME, see Using TomTom HOME on page 53. In the Planning section, select your RIDER. A picture of your RIDER is shown in the main section of TomTom HOME...