Tray 2 1 holds up to 50 sheets of 75 g/m (20 lb) media or five envelopes, ten transparencies, or ten cards. You can use tray 1 to print the first page on media different from the remainder of the document. Load paper and print media Tray 1 2 Media guides ensure that the media is correctly fed into the product and that the print is not skewed (crooked on the media). When loading media, adjust the media guides to match the width of the media that you are using. Load paper and print media Tray 2 or 3 1 Load media with the top forward and the side to be printed on facing down. Media guides ensure that the media feeds correctly into the product and that the print is not skewed. Tray 2 has side and rear media guides. 1 © 2007 Copyright Hewlett-Packard Development Company, L. com HP LaserJet M2727 MFP Series ­ Maintenance Replace print cartridges How do I? Steps to perform 1 Open the print-cartridge door. Replace print cartridges 2 Grasp the handle on the print cartridge and then pull the cartridge straight out to remove it. See the recycling information inside the print cartridge box. 3 Remove the new print cartridge from its packaging; remove the orange cover from the print cartridge, and then pull the orange tab straight out to remove the sealing tape. 4 Insert the cartridge into the product until it is firmly in place. 5 Close the print-cartridge door. 1 © 2007 Copyright Hewlett-Packard Development Company, L. com HP LaserJet M2727 MFP Series ­ Maintenance Replenish staples How do I? Steps to perform 1 Open the stapler door. Load staples 2 If you are replacing a staple cassette remove the staple cassette from the product. 3 Insert a new staple cassette into the opening inside the staple door. 4 Close the stapler door...