Description A. Spray nozzle (depending on the model) Water tank filling inlet with cover Steam control button (with self-clean function ) Spray button (depending on the model) Shot of steam button (depending on the model) Electric power cord support Thermostat indicator light Thermostat control dial Water tank maximum fill line. Soleplate Warning ! remove the soleplate protector before heating up the iron Warning ! before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal position for a few moments, away from your linen, ie press several times on the shot of steam button. What water to use ? Your appliance has been designed to function with untreated tap water. However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits. If your water is very hard (check with your water authority), it is possible to mix untreated tap water with store-bought demineralised water in the following proportions : 50% untreated tap water, 50% demineralised water. Types of water not to use ? Heat concentrates the elements contained in water during evaporation. Types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining, or premature wear of the appliance : water from clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners, pure distilled water, pure demineralised water or rain water, boiled water, filtered or bottled mineral water. All of these should not be used. - Do not use the appliance if it is not working properly or if it has been damaged. Any intervention apart from cleaning and normal maintenance by the customer must be carried out by an approved Moulinex service centre (see list in the service booklet)...