A < bottom of player > Charging The Player a. Plug the included USB/Charging cable into the H10. Plug the included AC adapter into a wall outlet then into the jack on the USB/Charging cable. The charging indicator light will illuminate on the cable. The light will dim when charging is complete. iriver strongly recommends that the player be fully charged or connected to the AC adapter prior to performing the functions below. charging indicator B Basic Operation 1. Software Installation Insert the installation CD, the software installation will begin automatically. Follow on-screen instructions to complete the software installation. Power On/Off a. Press the button to power on the H10. Press and hold the button to power off the player. Menu/Navigation a. Navigation uses a combination of buttons: a. Touch-pad for scrolling up and down menus b. button to select items c. button to return to the previous screen *At any time, press and hold the to the main menu screen. button to return a b < bottom of player > A a 4. Connect the H10 to a PC a. Connect the included USB cable to the port on the H10 then to an open USB port on your computer. Power on the player by pressing the button. The LCD screen will display "USB Connected". Windows may show "Found New Hardware" when the player is first attached. The H10 will appear as a new device under My Computer A B B c d e The H10 is now installed and working properly. Please see the reverse side for steps to load music onto the H10. This guide shows examples from Windows XP only. H10 QUICK START GUIDE GETTING MUSIC ON YOUR H10 PLAYER This guide shows examples from Windows XP only. A Get the latest Windows Media Player. In order to use music purchased from a music service, you must have Windows Media Player 10 installed...