, Digital Musical Instruments Division © 2013 Yamaha Corporation 211POAP*. *-01A0 Printed in Vietnam 1 Open the boxes to reveal their contents. After opening up the packages containing your electronic drum kit, please verify that all of the following components are present. Assembly Manual EN ZE16340 Components of both DTX532K & DTX562K  XP80 Snare Pad (x1)  PCY135 Cymbal Pad (x2)  RHH135 Real Hi-Hat Pad (x1)  Stand base for RHH135 (x1)  Hi-hat clutch for RHH135 (x1)  RS502 Electronic Drum Rack (x1)  RS502 Owner’s Manual (x1) This manual describes the standard assembly procedure for the DTX532K and DTX562K electronic drum kits. It covers assembly and wiring of the kit as shown below. When you have completed all of the steps described, you will be ready to turn on the drum module and start playing. Example of standard assembly IMPORTANT Cymbal pad Cymbal pad This manual describes the process of assembling a drum-pad set and drum module to an already assembled RS502 Electronic Drum Rack. Before starting the steps below, therefore, be sure to assemble your RS502 as described in the Owner’s Manual that came with it.  HS650A Hi-hat Stand (x1)  KP65 Kick Pad (x1)  Nine-channel snake cable (x1) Tom pads Real Hi-hat Pad  DTX502 Drum Module (x1)  Power adaptor (x1) * May not be included depending on your particular area. Please check with your Yamaha dealer. NOTICE Drum module Tom pad  Cable band (x6)  Stopper for PCY135 pads (x2)  Cable band for RHH135 (x1)  Tuning key (x1) Before starting assembly, lay a drum mat (sold separately) on the floor. Alternatively, you can place cardboard from the drum kit packaging or the like on the floor to prevent it from being scratched. This is particularly important when using the HS650A Hi-hat Stand and KP65 Kick Pad...