The earthing conductor of the cable is the yellow-green conductor. Two types of connection are provided: coloured Red. Connect Blue wire to terminal marked “N” or coloured Black. If a 13 amp plug (BS 1363) is N used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. How to connect an alternative plug Connection n° 1 Connecting the power supply cable to the mains. Fit a normalized plug to the cable, which corresponds to the load indicated on the data plate; if the cooker is connected directly to the mains, an omnipolar circuitbreaker with a minimum opening of 3 mm between the contacts, suitable for the load indicated and complying with current directives, must be installed between the appliance and the mains (the earthing wire must not be interrupted by the circuit-breaker). The power supply cable must be positioned so that it does not exceed room temperature by 50°C at any point of its length. Before making the connection check that: • the circuit breakers or fuses of the home system can support appliance load (see data plate); • the power supply system has an efficient earthing connection which complies with the provisions of current regulations and the law; • there is easy access to the socket or the omnipolar circuit-breaker once the cooker has been installed. ! do not use reducers, adapters or shunts as these could cause heating or burning...