! do not use reducers, adapters or shunts as these could cause heating or burning. Connection n° 2 Disposing of the plug. ! THIS APPLIANCE MUST BE EARTHED. Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug: ! the wires in the mains lead are coloured in accordance with the following code: Green & Yellow -Earth Blue -Neutral Brown -Live If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. Connect Green & Yellow wire to terminal marked “E” or 6 or coloured Green or Green & Yellow. Connect Brown wire to terminal marked “L” or coloured Red. Connect Blue wire to terminal marked “N” or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. How to connect an alternative plug The wires in this mains lead are coloured in accordance with the following code: B L U E“NEUTRAL” (N) BROWN “LIVE” (L) GREEN AND YELLOW “EARTH” (E) GB GREEN & YELLOW BROWN 13 amp fuse BLUE CROSS-BAR CORD GRIP Disposing of the appliance When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above. ! The plug and socket must be easily accessible...