Chart Options and display description PROGRAMME AND DELAY SELECTOR KNOB (see at right for options description and Table of programmes below) START BUTTON The indicator lights up during operation, flashes when a fault occurs, and goes off at the end of the programme. START BUTTON RESET FUNCTION: Press this button for at least 2 seconds; the selected programme and options will be cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be cancelled by RESETTING. Detailed instructions are given in chapter “What to do if. ON/OFF BUTTON Programme settings without start delay Start delay and programme settings Switch on the appliance - press the ON/OFF button. OK/Start lamp flashes. Set the desired start delay (3-6-9h). The selected start delay lamp (3-6-9h) flashes. 1 1 2 Table of programmes Consumption Detergent P 1 2 3 4 5 Programmes Available options Loading instructions Crockery to be washed later. Light soiling, for example glasses and cups. Lightly soiled crockery, with no dried-on food. * Use of tablets not recommended. Normally soiled crockery. Recommended programme for heavily soiled crockery, especially suitable for pots and pans. — Litres kWh Minutes 1) Pre-Wash Glasses Quickwash Eco 2) cold 40°C 45°C 50°C Delay 4. 03 14 Delay X 10. 85 100 Press the OK/Start button for confirmation. After that the OK/Start lamp switches off and the selected start delay lamp lights up. If you wish another time setting, press OK/Start button again. 3 2 X* 11. 80 30 Turn the programme knob to your desired programme position. The OK/Start lamp flashes. 4 Delay Delay X 12. 05 150 3 Intensive 70°C Delay X 14...