Скачать инструкцию



Фрагмент инструкции: руководство пользователя WHIRLPOOL ADG-6245-IX

Подробные указания по применению содержатся в руководстве пользователя.

Even if you use tablets which include salt functionality, you must still add regeneration salt since such detergents are not effective enough at softening hard water. First time use Press and hold together Programs and CANCEL/Off buttons for minimum 3 seconds. Programs LEDs will indicate the water hardness setting. Press the Programs button to increase setting (when the level reaches 7, the next key press will set the level back to 1. Wait 30 seconds (control panel switches off) or press START/Resume button to save setting. enter this value on your dishwasher 3 first PROGRAM LEDs lit on the panel (see table of programs) P1 P2 P3 1 2 3 4 5 6 7 go to step 1 (see “Daily check”) Suggestions for detergent use Gel or Powder (rinse aid and salt) Tablets 1. Ask your water supply company what the water hardness is. German degrees °dH 0-5 6 - 10 11 - 15 16 - 21 22 - 28 29 - 35 36 - 50 French degrees °fH 0-9 10 - 18 19 - 27 28 - 37 38 - 50 51 - 63 64 - 90 English degrees °eH 0 - 6. 3 7 - 12. 3 - 18. 6 - 25. 6 - 35 35. 7 - 44. 8 - 62. 4 Water hardness level Soft Medium Average Medium-hard Hard Very hard Extremely hard 10 9 1 4 At first time use, the salt reservoir has to be filled independently from water hardness level (see description below in step 1 “Daily check”). if water is HARD extra salt needs to be added (go to step 1, “Daily check”) Filling the salt reservoir - Dissolve limescale (not necessary if water hardness level is set to “soft”!) 3 2 1 7 8 Daily check Screw on the cap. Salt residual around the cap need to be removed. Some salt reservoir have a level indicator integrated in the cap (see below how to check). Visual indicator (depending on the model). Unscrew cap...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.