Фрагмент инструкции: руководство пользователя WHIRLPOOL ADG-630-WHПодробные указания по применению содержатся в руководстве пользователя. Toward the end of the programme, during the drying cycle, the display will indicate the time remaining in minutes. ” Identification of faults for service technician
Start button
Switches “on” when the dishwasher is operating. Flashes when a fault occurs. Switches off at the end of the programme. “Delayed start” button
The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00. Then press the Start button. The dishwasher will start at the set time. Indicators
Add rinse aid Add regeneration salt
Only add regeneration salt immediately before starting a wash programme. Antibacterial rinse 4)
This function adds an antibacterial rinse at the end of the wash cycle, thereby guaranteeing a perfectly clean and sanitized load. The lamp will light up when the function is activated. If the temperature is not maintained during the antibacterial cycle (e. if the door is opened and remains open for a long time), the lamp will start blinking to indicate that sanitation is not guaranteed. Wash cycle
Pre-Rinse
Washing
Drying
Programme end
Programme chart
Programmes Loading instructions
Detergent 2) A
X X X
Consumption 3)
Litres kWh Minutes
B
X X
Pre-Rinse Quickwash Normal 1) 5) Intensive 5)
1)
cold
Crockery to be washed later. 90
10 30 160 135
40°C Lightly soiled crockery with no dried-on food. 50°C Normally soiled crockery. 70°C heavily soiled crockery, especially
suitable for pans and saucepans... |
Copyright © 2005 - 2012 - Diplodocs -
Все права защищены. Торговые марки принадлежат их соответствующим владельцам. |