All safety advices give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: • The appliance must be disconnected from the power supply before carrying out any installation • The power cable must be long enough for connecting the appliance, once fitted in its housing, to • For installation to comply with current safety regulations, an all-pole disconnect switch with • • • • • • • • • • • • the power supply socket. minimum contact gap of 3 mm must be utilized. Do not use multiple plug adapters or extension leads. Do not pull the power supply cable in order to unplug the appliance. The electrical components must not be accessible to the user after installation. During and after use, do not touch the heating elements or interior surfaces of the appliance - risk of burns. Do not allow the appliance to come into contact with cloths or other flammable materials until all the components have cooled sufficiently. At the end of cooking, exercise caution when opening the appliance door, letting the hot air or steam exit gradually before accessing the oven. When the appliance door is shut, hot air is vented from the aperture above the control panel. Do not obstruct the vent apertures...