Step Four: Nail or screw the speaker-frame assembly to the wall studs and route the wires through the frame opening. After the Drywall is Installed Step Five: Cut the drywall. Step Six: Connect the speaker wires to the baffle assembly and install baffle assembly in frame. Do not overtighten the baffle screws. Step Seven: Replace the metal grille. AS Series Owner's Manual 9/11/98 12:51 PM Page 7 AS SUB 1-1/2" 1-1/2" 1-1/2" Step One: Remove the grille from the subwoofer frame. Step Two: Determine the correct subwoofer location. Step Three: Cut the drywall. Step Four: Loosen the eight phillips head screws until the locking tabs turn inward. Step Five: Connect the speaker wires to the baffle assembly. Step Six: Place the subwoofer in the wall. Step Seven: Screw down each of the eight phillips head screws. The tabs will swivel into place and secure the unit to the rear surface of the drywall. Step Eight: Replace the metal grille. AS Series Owner's Manual 9/11/98 12:51 PM Page 8 AS65C 1-1/2" 1-1/2" 1-1/2" Step One: Remove the grille from the speaker frame. Step Two: Determine the correct speaker location. Step Three: Cut the drywall. Step Four: Connect the speaker wires to the speaker. Step Five: Loosen the three phillips head screws on the frame until the locking tabs turn inward. Step Six: Place the frame assembly in the wall. Step Seven: Screw down each of the three phillips head screws. The tabs will swivel into place and secure the unit to the rear surface of the drywall. Step Eight: Replace the metal grille. AS Series Owner's Manual 9/11/98 12:51 PM Page 9 Painting the Speaker Frame and Grille AS Series loudspeakers can be painted to match any style of decor...