To obtain the best performance from this processor, please be sure to completely read this user's manual and use the JBL BassQ processor only in accordance with its instructions. Multiple Subwoofer Outputs Up to four subwoofers can be optimized. Multiple subs allow better seat-to-seat response and can greatly improve the listening experience over a single subwoofer. The JBL BassQ unit allows optimizing multiple subs to achieve the most accurate in-room response possible. Auto Turn-On and Power-Sequencing Due to the high current demands of power amplifiers at the instant of turn-on, the JBL BassQ processor is equipped with a power-sequencing circuit that turns on each amplifier in a delayed sequence, avoiding the large instantaneous current demand (and possible circuit breaker tripping) that could otherwise occur, should more than one amplifier turn on at the same instant. Multiple Microphone Inputs Multiple microphones allow for the optimization of multiple seats. This results in a larger listening area that benefits from a more accurate room optimization. Two Listening Curves Two different playback curves have been implemented to better match the type of playback material. Cinema mode closely follows the standard for playback curves used in commercial cinemas and scoring stages. This will allow the system to closely match the experience of the directors and producers of popular films and TV shows. Music mode is a gentler playback curve that better mimics the frequency response in most music production studios. FEATURES The JBL BassQ processor features the following: Minimum Phase Distortion The algorithms used to calculate and correct the room modes are designed to give the best results with the least amount of phase-induced distortion. This is unique to the JBL BassQ processor and is not available from any other product...