3 Installing the Toner Cartridge. 5 Loading Paper. 7 Changing the Size of the Paper in the Paper Tray. 9 Step 4: Step 5: Connecting Telephone Line. 11 Connecting a Printer Cable. 12 For Local Printing. 12 For Network Printing (WorkCentre PE120i only). 14 Step 6: Step 7: Step 8: Turning the Machine On. 15 Changing the Display Language. 16 Installing Xerox Software in Windows. 17 System Requirements. 17 Installing Xerox Driver CD. 18 Step 9: Viewing the User's Guide. 19 1. 2 SETTING UP YOUR PRINTER Step 1: Unpacking English 1 Remove the machine and all accessories from the packing carton. Make sure that the machine has been packed with the following items: NOTES: · The appearance of the power cord and the telephone line cord may differ depending on your country's specifications. · The CD-ROMs contains the Xerox printer driver, Scan drivers, ControlCentre, the User's Guide, and the Adobe Acrobat Reader program. · For the WorkCentre PE120i, the PS Driver CD-ROM is supplied with your machine. · You should use the telephone line cord which is supplied with your machine. If you are replacing it with another vendor's, it should be AWG #26 or lower gauge. · Power cord must be plugged into a grounded power socket. SETTING UP YOUR PRINTER 1. 3 2 Remove the packing tape from the front, back, and sides of the machine. Tape 3 Gently pull the scan lock label until it comes away from the machine. This will pull the scanner locking switch into the FORWARD (Unlocked) position automatically...