1 - Issued May 2006 Important Notes: All media is listed by product, machine run mode, Image Quality System Setting, weight (standard gsm), re-order number, size, and tray runability. The additional information column is for hints and tips on how to run certain media applications. Media recommendations made in this publication are based on qualification tests* conducted using standard test images with moderate to heavy image area coverage. Test duration for each product/media type is based on the suggested machine monthly copy/print volume. Test machines are maintained within specifications defined by user documentation. * Testing Environment temperature range of 60-75 deg. F, Relative Humidity range 20-40%. *Machine reliability specifications may be affected by increased usage of the Heavyweight ,Extra Heavyweight, Glossy, and Heavyweight Glossy modes. In addition, variances in machine reliability may occur due to extended use of some media types. Your Xerox service representative can advise you on using Heavyweight, Extra Heavyweight , Glossy, and Heavyweight Glossy modes or special application media types for long duration copy/print runs. Environmental conditions may require that coated paper be fed one at a time through Tray 5 (Bypass). Relative Humidity greater than 40% could cause multifeeds. Output may require removal at 25 sheets in the tray when not using a finisher. For Manual Duplex, it may be helpful to manually remove curl after printing side 1 before placing sheets into feeder for side 2. © 2006 Xerox Corporation. All rights reserved. Xerox® and all Xerox product names and product names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks are also acknowledged. For the latest line of Xerox supplies contact your local Xerox representative or a recommended distributor...