The procedure below explains how to clean your Phaser 480 printer. Try this procedure if printing is streaked or media feeds improperly. If you do not have a cleaning kit, call Tektronix at 1-800-835-6100, and order the Phaser 480 Cleaning Kit, part number: 016-1287-00. To perform Quick Cleaning you wlll need these items, found in your cleaning kit: 1 Lint-free wipes 2 Bottle, filled with 90% isopropyl alcohol 3 Cleaning sheet (reusable) 1 a b x 90% ISOPROP a x c x x 90% Isopropyl · Remove paper from the paper tray and place on a clean, dust free surface. · Replace the cover. · Place the cleaning sheet on the cover of the empty paper tray: - press the corners of the cleaning sheet under the hooks (a); - press the flaps into the opening in the tray (b) and under tray cover (c); · Dampen each of the 4 pads with at least 20 drops of alcohol (x). 2 3 4 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 · Replace the paper tray. · At the back of the printer, flip Switch 6 up. · Flip Switch 1 up, then down. · Wait for the motor noises (motion) to stop. · Repeat toggle of Switch 1 three more times, waiting each time for motor to stop. · Flip Switch 6 down. · Toggle Switch 1 up, then down. · Remove the paper tray. · Remove the cleaning sheet. [Phaser 480 Quick Cleaning Procedure] #8801, 3-14-95 PAGE 2 5 6 7 Isopr opyl · Open the top cover. · Remove the transfer roll tray. · Dampen a lint-free wipe with approximately ten drops of isopropyl alcohol. · Or use a pre-moistened alcohol wipe. · Clean the thermal head...