The targeted impressions per month are as follows: Output: Space requirements Depth Controller Note: The following data is accurate for the Sun Ultra 2 workstation and is presented as an example of typical space requirements for workstations. Space requirements for the printer controller are 36 by 36 inches/ 91 by 91 cm. Processor 17. 5 cm Monitor 21 in. 3 cm 4mm DAT SCSI tape drive (optional) Keyboard 12. 25 in. 31 cm 7. 1 cm Printer Space requirements (physical hardware and required service area) for each of the printer configurations are: DocuPrint 96 NPS printer with inverter feeder/stacker only DocuPrint 96/4635/180 NPS printer with inverter feeder/ stacker and one (1) feeder/ stacker DocuPrint 4635 NPS printer with inverter feeder/stacker and two (2) feeder/stackers DocuPrint 180 NPS printer with inverter feeder/stacker and two (2) feeder/stackers DocuPrint 96/4635/180 NPS printer with inverter feeder/ stacker and three (3) feeder/ stackers 114 in. 290 cm 114 in. 290 cm 191 in 485 cm 223 in. 567 cm 17. 5 cm 19 in. 3 cm 7. 19 cm 20 in. 8 cm 5 in. 7 cm 21 in. 3 cm 2. 75 in 7 cm Width Height · · · · Output bin: Each output bin has a capacity of 2500 sheets of 20 lb. (80 gsm) bond with offset capability The 96 NPS has one output bin as a standard, with one additional bin available as an option. The 4635/180 NPS has two output bins as a standard, with up to two additional bins available as options. The Printer Controller must be positioned within the line-of-sight of the printer for safety purposes while servicing the equipment. Customer must supply a table or desk for the Printer Controller. Work surface must be at least 36" X 36" to provide enough space for the components and cables...