Press Close repeatedly until you exit the Administration screens. · · There are several items that must be provided prior to starting the installation procedure. These items serve as a checklist for each TCP/IP installation environment. Print Service - You must configure the LPR daemon that you will be printing through. Printer Type - You must configure the print daemon on the server to account for support of TEXT (ASCII) or RAW (PostScript) data. Address Resolution - You must have STATIC or DHCP assigned. Host Name - You must provide a DNS or local Host Name. Subnet Mask - You must provide a Subnet Mask for the network to which your printer is currently connected. Default Gateway - You must provide the default Gateway Address where your printer is located (through which packets are forwarded to other networks or subnets). Decide now if you will use CentreWare Internet Services or CentreWare Printer Admin Services to customize printer connectivity settings. Press the Administration button, located on the printer Control Panel. Press Tools on the Touch Screen. Using the keypad, enter your Access Number and then press Enter on the Touch Screen. The default Access Number is 11111. It may have been changed by a System Administrator. Press Machine Setup on the Touch Screen. The list of available Items and their current settings are displayed. Press IP Address in the Items list, or use the scroll buttons to locate the IP Address field. Press Change Settings on the Touch Screen. After entering the IP Address using the keypad, press Save. If you are using DHCP, set the IP Address to 0. From the Items list, locate and set the Gateway Address and Subnet (Mask) Address. Power off and power on the printer...