0 NetBIOS/NetBEUI Microsoft Windows NT 4. 0 NetBIOS/IP OS/2 Warp NetBIOS/NetBEUI OS/2 Warp NetBIOS/IP 3. Using the keypad, enter your Access Number and then press Enter on the Touch Screen. The default Access Number is 11111. It may have been changed by a System Administrator. Press Machine Setup on the Touch Screen. The list of available Items and their current settings are displayed. Press IP Address in the Items list, or use the scroll buttons to locate the IP Address field. Press Change Settings on the Touch Screen. After entering the IP Address using the keypad, press Save. From the Items list, locate and set the Gateway Address and Subnet (Mask) Address. If you are using Token Ring, also set the Source Routing value. Continue with Step 2 Customize Printer Connectivity Settings. Step 2 Customize Printer Connectivity Settings If you use CentreWare Printer Admin Services: Before You Start: · You must create a Host (or SMB) Name and Workgroup. These should reside on an existing domain. For a Windows NT installation, you must have Microsoft TCP/IP Printing Services installed. If you are running NetBIOS/NetBEUI, you must use TCP/IP or NetWare for printer discovery. Decide now if you will use CentreWare Internet Services or CentreWare Printer Admin Services to customize printer connectivity settings. Install the Printer Admin Services software. Start the Printer Admin Services program. From a workstation click Start > Programs > Xerox CentreWare Color > Printer Admin Services...