This means you can now print to and check up on your printer status using your favorite Web Browser software! This card will show you how to set up this feature. Configure your printer Configure your Web Browser This procedure will configure your web browser software to connect to your printer on the network. Print a Configuration Report and retain the page for the steps below. Review the Configuration Report and verify the following in the TCP/IP Settings area are set correctly for your network: TCP/IP Address Default Gateway Subnet Mask Broadcast Address (if used) Review the HTTP: area of the Configuration Report and verify the following are set: HTTP enabled is set to ENABLED If the HTTP protocol has not been enabled, follow the procedure on the Static (Manual) TCP/IP Addressing Quick Install Card to enable this protocol. Record the TCP/IP Address assigned to your printer and proceed to the next section of this procedure called Configure your Web Browser. Print a Configuration Report and retain the page for the steps below. Launch your Web Browser software. Enter your printer's TCP/IP address from your Configuration Report into the Address or Location field on your browser (this name is browser dependent) and press RETURN. Your browser will connect to the imbedded web server on your printer and display the printer's "Home Page". Once you have established communication with your printer, be sure to save the URL in your Favorites, or Bookmarks (this name is also browser dependent), so you can quickly reconnect when necessary. To make it easier for browser software on other workstations to find the printer, be sure to update your DNS or NIS database to include the printer...