Record the following information: Network Interface Type ___________________ Workgroup Name _______________________ SMB Host Name ________________________ Printer Name ___________________________ OPTIONAL INFORMATION: SMB Host Description ____________________ Printer Description _______________________ b) On the keypad enter 1111 or the current password. Press the Enter button when finished. If your printer is an ST model press the Go to Tools button, otherwise skip to the next step. Assign the Workgroup and Host Names a) You will be returned to the previous screen, press the Workgroup and Host button. c) The Touch Screen will be used for the b) At the next screen, press the Workgroup Name button. Using the Touch Screen keys, enter the name of the workgroup in which you want the printer to appear then press Save. remainder of the data entry. Enable Microsoft Network printing. a) Press the Connectivity and Network Setup button. c) You will be returned to the previous screen. Press the SMB Host Name button. Using the touch panel keys, enter the desired text for this item then press Save. b) At the next screen, press the Network 4. Setup button. Enable the Protocol and Media. a) At the next screen, press the Microsoft Networking button. d) OPTIONAL STEP: Press the SMB Host Description button, enter the desired text then press Save. You will be returned to the previous screen. b) At the next screen, press the Transport and Media button. c) At the next screen, press the Enable button to enable the Microsoft Network protocols...