Фрагмент инструкции: руководство пользователя XEROX DOCUMENT-CENTRE-255-STПодробные указания по применению содержатся в руководстве пользователя. Record the following information AppleTalk Name ________________________ AppleTalk Zone ________________________
a) Press the Connectivity and Network
Setup button. b) At the next screen, press the Printer
Name button and enter the name you want for the printer (this is the name that will appear in the Chooser on your workstations) using the touch panel keys. Then press Save. b) At the next screen, press the Network
Setup button. c) At the next screen, press the
AppleTalk button. d) At the next screen, press the Protocol
and Media button. c) You will be returned to the previous
screen. Press the Zone Name button, enter the desired text for this item using the touch panel keys, then press Save (the printer default is * which means the printer will appear in ALL zones). e) At the next screen, press the Enable
button to enable the AppleTalk protocol. Go to the printer and. Connect your Document Centre 240/255/ 265 to the network with the appropriate cabling. Enter the Tools pathway
4. f) Press Save. Assign a Name and Zone to your printer. d) Press the Exit Tools button. a) You will be returned to the previous
screen. Press the Name and Zone button. a) Press the Access ( )button. b) On the keypad enter 1111 or the
current password. Press the Enter button when finished. If your printer is an ST model press the Go to Tools button, otherwise skip to the next step. c) The Touch Screen will be used for the
3. remainder of the data entry. Enable the AppleTalk protocol... |
Copyright © 2005 - 2012 - Diplodocs -
Все права защищены. Торговые марки принадлежат их соответствующим владельцам. |