Enter System Administrator Setups: using RARP): Press [IP Address], then press [Edit] and use the keyboard on the display screen to enter the static IP address for the DC220/ 230. This number is assigned by the System Administrator The Xerox DC220/230ST contains an embedded Web Server. CentreWare Internet Services contains tools within the Web Page that allow users to check the status of the queue, submit print ready files as print jobs, scan jobs, configure scanning templates, etc. In addition, after Internet Services is enabled, machine network configuration and setup can be accomplished from the System Administrator' s desktop (password required). a) Press the [Access] button on the Control Panel. b) Enter the System Administrator password by typing #22222 (# key and 22222) on the keypad and pressing [Enter] on the screen. Note: #22222 is the factory default password and may be changed by your Xerox service representative to suit your needs. OR d) RARP setup (skip this step if using a static IP address): Press [RARP], then press [Enabled]. Before Installation: Record the following information for use during setup at the DC220/230: TCP/IP Address:_________________________ Gateway Address:_______________________ Subnet Address:_________________________ Broadcast Address:______________________ Host Name:_____________________________ A minimum configuration of Microsoft Internet Explorer ® 4. x or higher, or Netscape Navigator® 3. x or higher should be used. Other browsers may work, but may not produce expected results. e) Press [Save]. f) Press [Gateway Address], then press [Edit] and use the keyboard on the display screen to enter the Gateway address of your network...