Скачать инструкцию



Фрагмент инструкции: руководство пользователя XEROX PHASER-220

Подробные указания по применению содержатся в руководстве пользователя.

Also, a pawl on each end of the connector latches around each end of the card to lock it in place. 5 Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240 New image processor install 1. Slide the new image processor board into its card cage slot. Close card cage top Insert image processor board 2. Close the card cage cover and secure it in place. Reinstall the printer covers. 6 Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240 4. Connect the I/O boardÕs ribbon cable to the image processor boardÕs I/O connector. Tilt the I/O board forward into place against the rear of the printerÕs card cage. Secure the I/O board in place with the two thumbscrews. Install I/O board Install ribbon cable 31865-06 5. Reconnect the interface cables. Turn on the printer and examine the startup page it should automatically print out. Refer to the Phaser 240 Color Printer User Manual for details on connecting interface cables and making prints. 7 Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240 Return the old boards to Tektronix 1. Repack the old image processor and engine board (new or old) in the anti-static bags. Put the anti-static bags inside the shipping box. In the U. : a. Write the printerÕs original serial number on the shipping return label. attach the shipping label to the box, covering the original shipping label. Securely tape the box closed and mail it to the pre-addresses location. Postage is prepaid. Outside the U. : a. AfÞx the special international shipping return label, included with this upgrade kit, to conceal the original U. shipping label. Write the printerÕs serial number on the shipping return label. Tape the box closed and ship the box to Tektronix, using you respective countryÕs shipping method...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.