Скачать инструкцию



Фрагмент инструкции: руководство пользователя XEROX PHASER-140

Подробные указания по применению содержатся в руководстве пользователя.

Installing the print head The print head is packaged in a sealed plastic box (1). When unpacked, the print head appears as shown (2). 1 2 4686-7-1 Before installing the print head, be sure to remove the packing material. 4868-7-3 For more information on installing the print head, see ÒInstalling the print head,Ó in Chapter 2 of the user manual. Copyright © 1994 by Tektronix, Inc. All rights reserved. 063-2260-01 Installation tips Installing ink cartridges When installing ink cartridges, be sure to press down on the cartridge until it snaps into place. 4868-7-2 For more information on installing ink cartridges, see ÒInstalling ink cartridges,Ó in Chapter 2 of the user manual. First-time power-up When you turn on the printer for the Þrst time, the printer purges the ink jets. This Þrst-time printhead initialization takes a few minutes. When the Þrst-time power-up is complete, the printerÕs front panel displays ready and the two green lights on the front panel are lit. SELECT When the Þrst-time power-up is complete, the printerÕs front panel may display ink out instead of ready. If this happens, press the SELECT button. The printer purges the ink jets again before displaying ready. In rare cases, the front panel will display something other than ready after the second purge. If this happens, turn the printer off, then on again. The printer will power-up correctly the second time. The printer is shipped with the startup page enabled. However, when you turn on the printer for the Þrst time, or when you install a new print head, you may not get a startup page. The printer will print a startup page on all subsequent power-ups, until the startup page is disabled...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.