Press "Save" 12. Repeat steps 8-11 to make any other changes. Select "Close" to exit. Page 2 Page 3 Sample Settings List Pages Communication Settings Ethernet Setting Connection Type Mac Address TCP/IP Get IP Address From IP Address Subnet Mask Gateway Address Auto 08:xx:xx Print a Settings List 1. Press "Machine Status" button on the User Interface Control Panel. Select Billing Meter / Print Report Select "Print Report / List" Select "Print Mode Settings" Select "Settings List (Common Items)" Press "Start" Button to print a Settings List. Refer to Sample Settings List on opposite page. DHCP / Manual xxx. xxx xxx. xxx xxx. xxx SMB Port Status Print Mode PJL Transport Protocol TBCP Filter Workgroup Host Name Auto Driver Download Auto Master Mode Encript Password Enabled Auto Enabled TCP/IP, NetBEUI Disabled WORKGROUP (Default) FX-0D3595 (Default) Enabled On On Load Print Drivers Print Driver Installation information for printing using LPR Win 95 / 98 / Me Requires third party Print Utility (Spooler) software to enable the creation of an LPR Port. Windows NT Add Printer wizard Add LPR Port Server Name or Address ­ Refer to IP Address on the Settings List. Name of Printer or Print Queue--"raw" Windows XP Add Printer wizard Local Printer Create new port--LPR Port Server Name or Address ­ Refer to IP Address on the Settings List. Name of Printer or Print Queue--"raw" Web User Interface Instructions A PC client connected to the network is required to complete the printer network set-up. Follow this procedure if you want to make any other changes to the printer configuration. Procedure 1. Open a web browser (Internet Explorer) 2. Verify that Proxy Servers are being bypassed for local web addresses. Type the TCP/IP address assigned to the printer in the URL window. (Refer to the Settings List for the TCP/IP Address) 4. Select "Properties" Tab. Make desired changes...