1-1 Obtain the IP address of the WorkCentre M24 from the machine settings list or network administrator. Open an Internet browser, in the Address field enter the IP address of WorkCentre M24 and press Enter. On the Internet Services screen click Properties. 1-3 Enter the Administrator Name and Password. Click OK. (See Machine Administrator User Guide for default password. ) Fig. 1-5 Click OK. The WorkCentre M24 will take approximately 5 minutes to reboot. 1-2 Click on Print Auditron. Make sure there is a checkmark in the Enable box next to Print Auditron. Click Apply New Settings. Note: In an environment that includes MAC, "Non Account Print" must be checked in order for the MAC users to be able to print. 1-4 The "Settings have been changed. " confirmation screen appears. Click Reboot. 1-6 After Reboot you will return to Fig. 1-1 and complete steps through Fig. 1-2 then skip to the window in Fig. 1-6 and click Print Auditron then continue on to Fig. Auditron Settings for Print - 1 of 4 Quick Start Guide Auditron Settings for Print Part 1 of 2 Fig. 1-7 Enter an unused Auditron Account Number, then click Edit. 1-9 Ensure the "Settings have been changed. " message appears. You are now ready to configure the Work Centre M24 print driver. Continue with Auditron Settings for Print Part 2 of 2. 1-8 Enter a User Name, 1 to 31 characters, that is not currently in use. Enter a Password, must be 4 to 12 numeric only, that is not currently in use. Click Apply New Settings...