Press the Select button below the display to select System Settings. Use the numeric keypad to enter the Password. The default password is 11111. Press the Select button to select Confirm. Turn DHCP Off 1. Press the Select button to highlight Print Settings, and then press the Enter button. Press the the Enter button to select Network/Port. Press the Select button until you see TCP/IP Settings on the display, and then press the Enter button. Select Get IP Address, and then press the Enter button. Select Manual, and then press the Enter button. Press the Exit button. Set the IP Address 1. Press the Select button until you see IP Address on the display,, and then press the Enter button. If there is an incorrect IP address in the field, press the Clear button to delete the address. Use the numeric key pad to enter the first number of the IP address, and then press the Right Arrow button to move to the next field. Repeat Step 3 to enter the remaining numbers. Press the Enter button to accept the address. Press the Exit button. Xerox WorkCentre M118/M118i 3 Verifying Network Setup Using CentreWare Internet Services (CentreWare IS) Set the Gateway Address 1. Press the Select button until you see Gateway Address on the display,, and then press the Enter button. Use the numeric key pad to enter the first number of the gateway address, and then press the Right Arrow button to move to the next field. Repeat Step 2 to enter the remaining numbers. Press the Enter button to accept the address. Press the Exit button. Set the Subnet Mask 1. Press the Select button until you see Subnet Mask on the display,, and then press the Enter button. Use the numeric key pad to enter the first number of the subnet mask, and then press the Right Arrow button to move to the next field. Repeat Step 2 to enter the remaining numbers. Press the Enter button to accept the subnet mask...