Print the Configuration Sheet / System Setting List a. Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed on the Touch Screen. Select the [Billing Meter / Print Report] tab. Select the [Print Report / List] button. Select the [Print Mode Settings] button. Select the [Setting List - Common Items] button. Press the [Start] button on the Control Panel to print the list. After printing the system settings sheet find the header Communication Settings (most likely on page 3 of the Systems Settings list), the MAC address will be under Ethernet Settings. NOTE: In this instance, MAC refers to Media Access Control, not the Macintosh. How to find MAC address of 4110/4590 Fiery Controller To find the MAC Address on the Fiery DFE Controller: 1. Select [START] 2. Select [Run] 3. Type ­ cmd and then select [OK] 4. In the CMD Window type ­ ipconfig /all ­ then press `enter' 5. Read the MAC Address as the `physical address' that is just above the customer's ip address. How to find MAC address of 4110EPS/4590EPS/4595 DocuSP Controller To find the MAC Address on the DocuSP DFE do the following: 1. Log on as Administrator User 2. Select [Setup] ­ Pulldown from top middle of screen. Select [Network Configuration] 4. Select the [Connections] Tab at top of screen 5...