BassPro II has been designed to deliver great bass performance from a compact, easily installed powered subwoofer enclosure. To get the best performance from your BassPro II, we strongly recommend that installation be entrusted to a qualified professional. Although these instructions explain how to install BassPro II in a general sense, they do not show specific installation methods that may be required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the installation yourself. Instead, please ask your authorized JBL car audio dealer about professional installation. In order that we may better serve you should you require warranty service, please retain your original sales receipt and register your BassPro II online at www. INSTALLATION WARNING: Playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or moderate levels while driving your car. JBL accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product. INSTALLATION WARNINGS AND TIPS: · Always wear protective eyewear when using tools. · Disconnect the vehicle's negative (­) battery terminal before starting the installation. · Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring harnesses, and that wire routing will not interfere with the safe operation of the vehicle. · When making electrical connections, make sure they are secure and properly insulated. · If BassPro II's fuse must be replaced, be sure to use the same type of fuse and current rating as that of the original. Figure 1. Figure 2. CHOOSING A MOUNTING LOCATION FOR BASSPRO II: Choose a mounting location that doesn't interfere with cargo, the folddown rear seat or the trunk lid...