COM GENUINE JBL INSTALLATION WARNINGS AND TIPS ABOUT THESE INSTRUCTIONS Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install GTi component systems in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself ­ instead, ask your authorized JBL car audio dealer about professional installation options. LOUD MUSIC AND HEARING Playing loud music in an automobile can hinder your ability to hear traffic, as well as permanently damage your hearing. The maximum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. JBL accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of this product. A NOTE ABOUT SYSTEM PERFORMANCE For the best performance possible, the GTi components should be used with a two-channel amplifier with output power of at least 50W RMS per channel. The passive crossover contains impedancecompensating circuitry and has been computer-optimized for the flattest possible frequency response with the tweeter flush-mounted, on-axis with the listener. The combined responses of the speakers and passive crossover constitute a 4th-order Linkwitz-Reily acoustic alignment and cannot be duplicated with any electronic crossover currently available for car audio use. Consequently, bi-amping a GTi component system with an electronic crossover is not recommended. SPEAKER PLACEMENT Figures 1­4 show possible speaker placements in the order of most desirable to least desirable...