Thank you for the trust you are putting into our brand! The following installation instructions are intended to help you getting the best performance from your Blaupunkt product. To avoid the aggravation of costly mistakes and serious damage to your system, please read all of the instructions carefully before you begin. If you're not confident that you can install the unit correctly, have it installed by a qualified Blaupunkt installation technician. 2 Installation and connection regulations While connecting and installing this equipment, make sure to disconnect the negative terminal of the battery. Important! Observe all safety precautions provided by the automobile manufacturer (alarm systems, immobilisers, airbag)! Before drilling the holes for mounting and wiring, make sure that no existing wiring or vehicle parts will be damaged (e. petrol tank, petrol lines). Use wire bushings for all sharp-edged holes. To avoid interference, make sure to lay the wiring far enough away from the wire harness. Attach a fuse to the positive supply wire at a maximum of 30 cm from the battery to protect the battery and the positive supply wire in the event of a short circuit. The navigation equipment is suitable for vehicles with: · 12 V battery power · Negative pole on the vehicle body Contents Safety precautions. 2 Installation. 4 Description. 4 Notes on how the system functions. 4 Installation preparations. 4 Important installation information for the speedometer signal. 7 Connecting the speedometer signal. 7 Assembly illustrations...