40 6/2006 Edition 1 P-202H Plus v2 Quick Start Guide Overview The P-202H Plus v2 is an ISDN router with a four-port built-in switch. It is equipped with two integrated phone ports for connecting analog phones and/or fax devices. It also provides advanced calling features, such as call waiting, three-way calling, call transferring and forwarding. See your User's Guide for background information on all features. 1 Requirements Make sure you have the following things before you set up your P-202H Plus v2. · Internet access - account information provided by your ISP, such as user name, password, and so on. · Internet Explorer 6. 0 or later or Netscape Navigator 7. 0 or later, with JavaScript enabled. 2 Hardware Connections 1 PHONE 1-2: Use a telephone cable (and any telephone adaptors provided with your P-202H Plus v2) to connect your telephones to these ports. If you only have one telephone, you should only use one port. 2 ISDN: Use the included ISDN cable to connect your P-202H Plus v2's ISDN port to the ISDN wall jack. 3 ETHERNET: Use an Ethernet cable to connect a computer to the ETHERNET port for initial configuration and/or Internet access. 2 P-202H Plus v2 Quick Start Guide 4 POWER: Use the power adaptor provided with your P-202H Plus v2 to connect an appropriate power source to this port. Make sure the power source is on. 5 Push in the POWER button. Look at the LEDs on the front panel. · The POWER LED blinks while your P-202H Plus v2 starts up and stays on once the system is ready. · The ISDN and ETHERNET LEDs stay on if the corresponding port is properly connected and blinks when there is traffic. If any of these LEDs are not on, check your connections, and inspect your cables for damage. If the LEDs are still off, contact your local vendor. 3 Initial Configuration 1 Open your web browser, and go to http://192. 2 The login screen displays...