60 6/2005 P-2302R Series Overview This Quick Start Guide covers the Prestige (P-2302R) and (P-2302RL) models. It explains how to use your Prestige to make phone calls through the Internet. See your User's Guide for more information on all features. The P-2302RL's lifeline feature adds regular phone services (that do not use the Internet). The following figure shows your Prestige (A) connected to the modem or router that provides your Internet connection (B). C is your voice service provider. This guide is divided into the following sections. 1 Requirements 2 Hardware Connections 3 Initial Configuration 4 Make Calls Through the Internet 5 Troubleshooting 1 Requirements You need the following: Prestige Computer Telephone Broadband Modem or Router Power Adaptor Telephone Cable Ethernet Cable Note: You should have Internet access and a voice account already set up. 2 P-2302R Series 2 Hardware Connections 1 LAN: Connect a computer or an Ethernet switch to this port with an Ethernet cable. 2 WAN: Connect a broadband modem or router to this port with an Ethernet cable. 3 LINE: (P-2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO (Foreign Exchange Office) port. 4 Phone 1-2: Connect one or more analog telephones to these ports using telephone wire. These are FXS (Foreign Exchange Station) ports. 5 POWER: Use the included power adaptor to connect this power socket to an appropriate power source (see the User's Guide for power adaptors by region). The PWR/VoIP LED flashes during system startup and stays on after the system self-tests are successful. The WAN and LAN LEDs turn on if the WAN and LAN ports are properly connected (they flash when sending or receiving data)...