11g Wireless ADSL VoIP IAD Prestige 2602HWL-C Series 802. 11g Wireless ADSL VoIP IAD with Lifeline Quick Start Guide Version 3. 40 3/2005 Prestige 2602HW Series Quick Start Guide Overview The Prestige 2602HW or 2602HWL ADSL VoIP IAD (Integrated Access Device) is an ADSL router with two phone ports for Voice over IP (VoIP) calls. The Prestige also has a built-in switch and IEEE 802. 11g wireless capability. The Prestige 2602HWL's lifeline feature adds regular phone services (that do not use the Internet). See the User's Guide for more information on all features. The following figure shows your Prestige (A) connected to the Internet. 1 Hardware Connections You need the following before you start: Note: You may need your Internet access and voice account information. Prestige Computer Telephone Power Adaptor Ethernet Cable Telephone Cable 2 Prestige 2602HW Series Quick Start Guide Do the following to make hardware connections for initial setup. 1 DSL: Connect the Prestige to a telephone jack using the included telephone wire. In the P2602HWL, the DSL port handles both the ADSL and regular telephone service connections. Connect the included v-shaped cable (with one gray wire and one green wire) to the P2602HWL's DSL port. Connect the gray wire to the "modem" jack on a telephone or ISDN splitter (not included) and the green wire to the splitter's "phone" jack or a telephone wall jack. This is a FXO (Foreign Exchange Office) port. Note: If you are using T-ISDN (UR-2), connect the green wire to the (included) UR-2 to TAE connector before connecting it to the telephone splitter's "phone" jack or a telephone wall jack. 3 Prestige 2602HW Series Quick Start Guide 2 LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access. 3 PHONE: Connect one or more analog telephones to these ports using telephone wires...