11g Wireless ADSL VoIP IAD Firmware v3. 70 Edition 1, 12/2008 DEFAULT LOGIN DETAILS IP Address: Username: Password: http://192. 1 admin 1234 www. zyxel. com Copyright 2008 ZyXEL Communications Corporation Device Panels WLAN BUTTON POWER LED WLAN LED ETHERNET LED ADSL LED WAN LED PHONE 1, 2 LEDS INTERNET LED DSL PORT ETHERNET PORTS DSL/WAN WAN PORT RESET PHONE PORTS POWER ON/OFF 2 ENGLISH Overview The P-2612HW-F1 is a router which combines high-speed ADSL Internet access, a built-in switch, a firewall and high-speed wireless networking capability. It also has a phone port for making calls over the Internet (Voice over IP or VoIP). Requirements Make sure you have the following things before you start. · Internet access - account information provided by your ISP, such as user name, password, and so on. · Internet Explorer 6. 0 or later or Netscape Navigator 7. 0 or later, with JavaScript enabled. See the User's Guide for all configuration details including file sharing and setting up a shared printer. 3 To read the User's Guide insert the CD that came in the box into your CD-ROM drive. A screen should pop up. Navigate to the User's Guide from this screen. If a screen does not pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually drive D) and navigate to it from there. 4 ENGLISH Hardware Connections Remove the plastic cover from the P-2612HW-F1 before you use it. DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if you have one). WAN: If you have a DSL router or modem already in your network or you want to use a cable modem, push the DSL/WAN switch to the WAN side and use an Ethernet cable to connect this port to an Ethernet jack with Internet access. ETHERNET: Use an Ethernet cable to connect a computer to one of these ports for initial configuration and/or Internet access...