11g Wireless Projector Adapter Quick Start Guide Version 2. 00 10/2007 Edition 1 DEFAULT SETTINGS IP Address Passwords Conference 1234 Control Host Admin 1234 SSID ZyXEL http://192. 10 Copyright © 2007. All rights reserved. WPA-1000 Quick Start Guide WPA-1000 Overview The WPA-1000 allows meeting participants to access and share one projector via wireless connection to the WPA-1000, as shown in the figure below. IEEE 802. 11b/g standards are supported and wireless connections can be secured with WEP security. This Quick Start Guide shows how to connect to the WPA-1000 with an Ethernet cable in order to access it and first enable wireless security. This is recommended as the wireless connection is not secure by default, so people in adjacent rooms may be able to view your presentation. After you configure wireless security, everyone who knows the security settings can connect wirelessly to the WPA-1000 and use the WPA-1000 to display their presentation. See your User's Guide on the CD in the package for more information on all features. To read the User's Guide, insert the CD that came in the box into your CD-ROM drive. A screen should pop up. Navigate to the User's Guide from this screen. If a screen does not pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually drive D:) and navigate to it from there. What You Have To Do 1 Make hardware connections 2 Note information in the standby screen 3 Configure wireless security 4 Connect wirelessly to the WPA-1000 5 Install the WPA-1000 utility 2 WPA-1000 Quick Start Guide 6 Start sharing projections What Your Computer Should Have · Intel Pentium III 800MHz or faster processor · 256 MB RAM required; 512 MB, or more recommended · 10 MB free hard-disk space · Microsoft Windows 2000 Service Pack 4 or later, Windows XP Service Pack 2 or later, or Windows Vista 32 bit · Microsoft Internet Explorer 6. 0 or 7. 0 (recommended); Firefox 1. 5 or 2...