0) Battery Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at http://www. apple. com/installparts/. Tools Required · a plastic flat-blade screwdriver to pry the battery from the battery holder Opening the User Access Door 1. Save all open documents and quit all open applications. Turn the computer off by choosing Shut Down from the Special menu (if using Mac OS 9), or choose Shut Down from the Apple menu (if using OS X). Unplug all cables, except the power cord, from the computer. Warning: If the internal modem is connected to a telephone line, disconnect the telephone line from the internal modem port before you open the user access door. This prevents electric shock. (Figure 1) Figure 1 4. Place a soft towel or cloth on the desk or surface. Position the computer so the screen is facing down on the cloth. Use a Phillips screwdriver to remove the screw on the user access door. Set the user access door aside. (Figure 2) Figure 2 eMac (ATI Graphics) and eMac (USB 2. 0) Battery - 2 6. Touch the metal surface on the back of the computer. (Figure 3) This helps protect the computer from damage caused by electrostatic discharge. Figure 3 Important: To avoid electrostatic discharge, always ground yourself by touching metal before you touch any parts or install components inside the computer. To avoid generating static electricity, do not walk around the room until you have finished installing the battery and closed the computer. Unplug the power cord. eMac (ATI Graphics) and eMac (USB 2. 0) Battery - 3 Replacing the Battery 1. Locate the battery. (Figure 4) Figure 4 2. Note the orientation of the battery's positive (+) end. Remove the battery from its holder...