- Do not place any utensil containing metal in a microwave oven. - Use the accessories one at a time. - Handle the metal blade and discs with great care: they are extremely sharp. - You must remove the blades (D) and spindle (C) before emptying the bowl of its content. - Empty the chopping bowl or liquidiser jug before detaching the handle. - Never touch the parts when they are moving. - Do not run your appliance empty. - Do not allow long hair, scarves, ties etc. to dangle over accessories during operation. - Never use or plug in your appliance if : - Its power cord is faulty or damaged. - The appliance has been dropped. - It has visible damage or operating faults. In such cases, to avoid any danger, contact your Approved Service Centre to have the appliance repaired, as special tools are required. - Before using the liquidiser drive (A2): ensure that there is no accessory fitted on the bowl and drive accessory. Functions of your food processor 1 FITTING DETACHABLE PARTS. ASSEMBLING / DISMANTLING THE BOWL (B3) The bowl is used with the following accessories (depending on model): - blades (D), grating/slicing discs (E), whisk (F), emulsifying disc (G), citrus press (H), juice extractor (J), "Maxipress" (L). - If not already fitted, - position drive (B3a) in the bowl. - Lock the drive (B3a) with the nut (B3b) as far as it will go. - Dismantle the bowl assembly and clean it after each use. FITTING/DETACHING THE BOWL HANDLE (B4) AND THE LIQUIDISER JUG HANDLE (I4) For ease of cleaning and storage, the bowl handle (B4) and liquidiser jug handle (I4) are detachable. - To fit the handle, position it against the lugs of the bowl/jug. - Slide the handle upwards until it clicks. - To detach the handle, press the release button (B4a) or (I4a) and slide the handle downwards. (note: the lid of the liquidiser jug must be unlocked in order to be able to detach the handle (I4)...